Description

10 oz Frosted Glass Mug. Handle extends 1 3/8″ from mug. Hand wash only

Mug heat press settings:
– temperature – 400 degrees F
– dwell time – 5:00 – 7:00 minutes (see the press manufacturer for recommended
dwell time for glass mug)
– pressure – light

Steps:
1. cut your transfers so that the transfer is slightly larger vertically than
the mug.
2. Position the substrate onto the transfer.
3. Tape two ends of the transfer near the handle of the mug using the heat
tape.
4. Wrap a piece of scratch paper around the transfer and mug taping if
necessary.
6. Center the mug in the mug press.
7. Close the mug press using the mug heat press settings above.
8. Remove items from the press immediately. Use heat resistant gloves if
necessary – the items will be very hot.
9. Tear off the scratch paper and the transfer and place in front of fan for
cooling.