Description

7″ x 11″ Mahogany Cross with Sublimatable Hardboard Oval Insert

Oval gloss white hardboard tile comes with pre-applied adhesive. Attach tile after sublimation with a strip of double-sided tape (included).. Made in the USA.

Heat press settings:
– temperature – 400 degrees F
– dwell time – 1:15-1:30 seconds
– pressure – light to medium

Steps:
1. Remove the protective plastic coating if any from the substrate.
2. Align the substrate onto the transfer.
3. Tape two ends of the substrate to the transfer using the heat tape.
4. Place the transfer and substrate in the press onto the paper towel
(transfer on top of substrate).
5. Place the teflon sheet or scratch paper over the transfer and substrate.
6. Press the items using the settings listed above.
7. Remove items from the press immediately. Use heat resistant gloves if
necessary – the items will be very hot.
8. Tear the transfer in half opposite the taped ends.